MCRC-1
Custom Master Control Room Console
|
Features and Specifications:
6 stereo source input select.
Mono sum switch for monitoring L+R.
Dim switch + dim level knob.
Control room level knob w/large & accurate scaling.
Talk-back/slate system with internal compressor on TB Mic.
1kHz oscillator (for recording Q tone with variable &
cal +4 level).
Control room to cues function. |
|
MCRC-2
Small Custom Master Control Room Console
|
This small, table-mounted MCRC
unit was specially designed for small project studios.
It comes with its own wire kit that covers almost 90% of a
small studio wire setup .
This unit can be ordered as a passive unit (unbalanced) or
active which means fully balanced I/O. |
|
External talk-back
unit |
This table mounted T.B unit
Fits to all our Pre+c.room
Products & serves as an external
T.B unit + it can serve as a stand alone T.B unit. |
|
Altec lansing
9470A amp module
|
This unit is
a 4 channel Altec lansing 9470A gain block salvaged from an
Altec 9200A vintage console that we had to convert into a
state of the art Mic amplifier.
Those gain blocks are very similar if not equal to the
Langvin AM16 "all propose" amplifiers. |
|
Telefunken V72a
amplifier
|
This unit is a Telefunken
V72a amp that we cased as a microphone pre amplifier. |
|
Stereo VU meter
|
This custom unit
was made for analog mastering purposes.
Features:
Special high impedance balanced inputs.
(Allows parallel connection to monitored material without
significant insertion losses).
Three selectable reference levels +4/+10 & +16 (other
levels available upon request).
All reference level calibration via special multispin trimmers
on front panel. |
|
|
|
32 Way Microphone
splitter
|
This is a custom 32 way microphone split box that was
built for one of our clients it features one direct out
(transformerless) + one isolated output for each channel. |
|
|
|
32/2 Summing box
|
This unit is a custom
32/2 passive summing box that we made for one of our clients. |